Rep 90.2 Dispenser Pipe Assembly; Rep 90.3 Btr Assembly - Xerox VersaLink B7025 Service Manual

REP 90.2 Dispenser Pipe Assembly

Parts List on PL 90.05
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1. Remove the drum cartridge, REP 90.4.
2. Remove the front cover, REP 28.1.
3. Remove the inner cover, REP 28.2.
4. Remove the print head assembly, REP
5. Remove the AC housing assembly,
6. Remove the dispenser pipe unit, REP
7. Disengage two hooks (1), then remove the cartridge guide from the dispenser pipe
assembly, Figure 1.
Figure 1 Dispenser pipe assembly removal
Replacement
The replacement is the reverse of the removal procedure.
Repairs and Adjustments
REP 90.2, REP 90.3
WARNING
GP 10. Disconnect the power cord
60.8.
REP 90.6.
90.1.

REP 90.3 BTR Assembly

Parts List on PL 90.15
Removal
NOTE: A video of this procedure is available on the EDOC. The video is accessible from the
Library menu on the Service Interface.
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1. Open the LH transport assembly,
2. Disengage the hooks (1) on front and rear, then remove the BTR assembly (2),
Figure 1 BTR assembly removal
Replacement
1. The replacement is the reverse of the removal procedure.
2. If a new BTR assembly is installed, enter
954-820.
April 2017
4-220 Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
WARNING
GP 10. Disconnect the power cord
PL 80.45 Item 1.
dC135 HFSI Counter. Reset the HFSI counter
Figure 1.
Launch Issue