9.
Remove the front bearing,
Figure
2:
a.
Remove the E-clip (1).
b.
Remove the registration coupling (2).
c.
Remove the bearing (3).
Figure 2 Front bearing removal
10. Remove the rear bearing,
Figure
3.
Figure 3 Rear bearing removal
Launch Issue
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
11. Remove the registration roll,
Figure 4 Registration roll removal
Replacement
1.
The replacement is the reverse of the removal procedure.
2.
When installing the registration clutch assembly, align the cutout with the harness guide
tab,
Figure
5.
April 2017
4-199
Figure
4.
Figure 5 Alignment
Repairs and Adjustments
Cutout
REP 80.20