Iq23 Blank Image Rap - Xerox VersaLink B7025 Service Manual

Hide thumbs Also See for VersaLink B7025:
Table of Contents

Advertisement

IQ23 Blank Image RAP

Paper has no visible image.
Ensure
IQ1
Image Quality Entry RAP is performed before starting this RAP.
BSD-Reference:
BSD 9.2 Charging and Exposure
Procedure
WARNING
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to
GP
10. Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
Check the installation of the print head assembly,
is installed correctly.
Y
N
Correctly install the print head assembly.
Check the drum ground contact point, positioned on the front underside of the drum cartridge
for contamination or distortion. The drum ground contact point is good.
Y
N
Clean the drum ground contact point. Correct any distortion.
Remove, then reinstall the drum cartridge,
machine,
GP
10. Make a print. The image quality defect persists.
Y
N
Perform
SCP 5
Final Actions.
Install a new drum cartridge,
PL 90.20 Item
Make a print. The image quality defect persists.
Y
N
Perform
SCP 5
Final Actions.
Print a page that is entirely black. During the print cycle, switch off the power after the paper
has been fed out of the tray (stop the transfer in mid-progress). Check the surface of the drum.
There is a considerable amount of toner on the surface of the drum.
Y
N
Check the ribbon cable and connectors between the print head assembly and PJ1363 on
the ESS PWB. The ribbon cable and connectors are good.
Y
N
Correct the connections. If necessary, install a new FFC cable,
Install new components as necessary:
Print head assembly,
PL 60.35 Item
Drive PWB,
PL 1.10 Item
3.
ESS PWB,
PL 3.10 Item
6.
A
Imaqe Quality
IQ23
PL 60.35 Item
1. The print head assembly
PL 90.20 Item
1. Switch off, then switch on the
1. Switch off, then switch on the machine,
PL 60.35 Item
1.
A
Check the connections to the components that follow, install new components as necessary:
BTR assembly,
PL 90.15 Item
HVPS,
PL 1.10 Item
2.
Drive PWB,
PL 1.10 Item
GP
10.
9.
April 2017
3-20
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
4.
3.
Launch Issue

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Versalink b7030Versalink b7035

Table of Contents