Registration Sensor Jam (Tray 4) Rap - Xerox VersaLink B7025 Service Manual

TTM Checkout
Perform the steps that follow:
1. Check the tray 4 transport roll, PL 80.70 Item 14
install new components as necessary.
2. Enter dC330, code 074-103. Check the tray 4 feed out sensor,
3. Enter dC330, code 074-001. Check the tray 4 feed/lift motor,
4. Enter dC330, code 077-033. Check the take away motor,
5. Check the drive gears, PL 80.20 for wear or damage.
6. If the fault persists, install new components as necessary:
• TTM PWB, PL 70.90 Item 1.
• ESS PWB, PL 3.10 Item 6.
Launch Issue
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
for foreign substances or wear. Clean or
PL 80.70 Item 6.
PL 80.20 Item 4.
PL 70.23 Item 4.
April 2017

074-105 Registration Sensor Jam (Tray 4) RAP

BSD-ON: BSD 8.5 Registration
074-105 The registration sensor did not actuate within the specified time after the registration
clutch initialized during paper feed from tray 4.
Initial Actions
Check the condition of the paper in tray 3. Refer to
Procedure
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to GP
death or injury. Moving parts can cause injury.
Refer to the procedures that follow as necessary:
• GP 6 How to Check a Motor.
• GP 7 How to Check a Sensor.
• GP 8 How to Check a Solenoid or Clutch.
Perform the steps that follow:
1. Check for obstructions in the paper path.
2. Check the tray 4 feed roll, nudger roll and retard roll,
wear. Clean or install new components as necessary.
3. Enter dC330, code 077-104. Check the registration sensor,
4. Enter dC330, code 077-002. Check the registration clutch,
5. Enter dC330, code 077-001. Check the take away clutch,
6. (3TM Only) Enter dC330, code 077-033. Check the 3TM takeaway motor,
4.
7. (TTM Only) Enter dC330, code 077-035. Check the TTM takeaway motor 2,
Item 2.
8. Check the drive gears, PL 80.10
sary.
9. Check the drive assembly, PL 40.10 Item 7
10. If the fault persists, install new components as necessary:
• 3TM PWB, PL 70.23 Item
• TTM PWB, PL 70.90 Item
• Drive PWB, PL 1.10 Item
• ESS PWB, PL 3.10 Item
2-475
GP 15 Paper and Media Size Specifications
WARNING
10. Disconnect the power cord. Electricity can cause
PL 80.25 for foreign substances or
PL 80.55 Item
PL 80.55 Item
PL 40.10 Item
for wear or damage. Install new components as neces-
for wear or damage.
5.
1.
3.
6.
Status Indicator RAPs
074-101, 103, 900, 074-105
4.
11.
5.
PL 70.23 Item
PL 70.85