Xerox VersaLink B7025 Service Manual page 786

7. Detach the carriage cable from the full rate carriage,
a. Move the full rate carriage (1) to the cutout in the frame.
b. Remove the screw (2).
Figure 3 Cable detachment
8. Prepare to remove the carriage cable,
a. Unhook the extension spring (1) from the frame.
b. Detach the cable (2) from the extension spring.
Figure 4 Preparation
Repairs and Adjustments
REP 60.3
Figure 3:
Figure 4:
9. Remove the anchor ball (1) from the notch in the frame, then remove the carriage cable,
Figure 5.
Replacement
1. Insert the anchor ball of the carriage cable into the groove in the capstan,
April 2017
4-146 Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
Figure 5 Cable removal
Figure 6 Anchor ball
Figure 6.
Launch Issue