REP 3.2 ESS PWB Chassis Assembly
Parts List on
PL 3.10
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
Figure 1 ESD Symbol
Observe ESD procedures during this procedure.
Do not touch the battery. Do not peel off the protective tape.
1.
Remove the upper rear cover,
REP
2.
Remove the lower rear cover,
REP
3.
Remove the RH top cover,
PL 28.06 Item
4.
Remove the RH rear cover,
PL 28.06 Item
Repairs and Adjustments
REP 3.2
WARNING
GP
10. Disconnect the power cord
CAUTION
CAUTION
28.5.
28.6.
2.
3.
5.
If the machine has an HDD assembly installed, remove the HDD assembly,
a.
Disconnect the connectors (1).
b.
Remove the HDD assembly (2).
6.
If the machine had an HDD assembly installed, remove both screws (1), then the HDD
bracket (2),
Figure
3.
Figure 3 HDD bracket removal
April 2017
4-18
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
Figure 2 HDD removal
Figure
2:
Launch Issue