Xerox VersaLink B7025 Service Manual page 836

3. Pull out the bossed (1) from the mounting holes. Release the hook (2), then remove the
hinge front cover, Figure 2.
Figure 2 Hinge front cover removal
4. Disconnect the connector, Figure 3:
a. Release the harness from the retainer (1).
b. Disconnect the connector (2).
Figure 3 Connector
Repairs and Adjustments
REP 80.18
5. Remove the L/H cover, Figure
a. Open the LH cover.
b. Rotate by 90 degrees, then disconnect the rear support (1).
c. Rotate by 90 degrees, then disconnect the front support (2).
d. Hold the L/H cover (3) open at 90 degrees.
e. Remove the L/H cover in the direction of the arrow (4).
April 2017
4-196 Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
4:
Figure 4 LH cover removal
Launch Issue