Rep 80.4 1Tm Pwb - Xerox VersaLink B7025 Service Manual

REP 80.4 1TM PWB

Parts List on PL 70.17
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
Figure 1 ESD Symbol
Observe ESD procedures during this procedure.
1. Remove the rear cover, Figure 1:
a. Remove four screws (1).
b. Remove the rear cover (2).
Figure 2 Rear cover removal
Repairs and Adjustments
REP 80.4
WARNING
GP 10. Disconnect the power cord
CAUTION
2. Remove the 1TM PWB, Figure
a. Disconnect five connectors (1).
b. Remove four screws (2).
c. Remove the 1TM PWB (3).
Replacement
1. The replacement is the reverse of the removal procedure.
2. After installing a new 1TM PWB, change the value of NVM ID 742-205 to '0'.
April 2017
4-180 Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
2:
Figure 3 1TM PWB removal
Launch Issue