005-916 DADF APS Sensor 2 Static Jam RAP
BSD-ON:
BSD 5.5 Document Feeding (2 of 2)
005-916 DADF APS sensor 2 detected paper when powering on, closing the feeder cover or
closing the DADF.
Procedure
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to
GP
10. Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
Refer to the procedure that follows as necessary:
•
GP 7
How to Check a Sensor.
Perform the steps that follow:
1.
Enter dC330, code 005-219. Check the DADF APS sensor 2,
2.
If the fault persists, install a new DADF PWB,
Launch Issue
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
WARNING
PL 5.50 Item
PL 5.10 Item
11.
005-917 DADF APS Sensor 3 Static Jam RAP
BSD-ON:
BSD 5.5 Document Feeding (2 of 2)
005-917 DADF APS sensor 3 detected paper when powering on, closing the feeder cover or
closing the DADF.
Procedure
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to
death or injury. Moving parts can cause injury.
Refer to the procedure that follows as necessary:
•
GP 7
How to Check a Sensor.
Perform the steps that follow:
8.
1.
Enter dC330, code 005-220. Check the DADF APS sensor 3,
2.
If the fault persists, install a new DADF PWB,
April 2017
2-47
WARNING
GP
10. Disconnect the power cord. Electricity can cause
PL 5.50 Item
PL 5.10 Item
11.
Status Indicator RAPs
005-916, 005-917
8.