Gp 27 Billing Plan/Region Conversion Process - Xerox VersaLink B7025 Service Manual

• If a replacement dongle is required after the machine has been recorded as installed, use
the IDR process to obtain a new initialization kit. Request the initialization kit be shipped
via air to ensure timely delivery.
XCL
Contact the local OTI Delivery Analyst.
XE
Follow the standard product replacement process (DOA/TEX) for the relevant initialization kit
number.
Table 1 Initialization kit numbers
Speed PagePack Billing Plan
25ppm No Metered
30ppm No Metered
35ppm No Metered
25ppm No Sold
30ppm No Sold
35ppm No Sold
25ppm No Sold
30ppm No Sold
35ppm No Sold
25ppm No Metered
30ppm No Metered
35ppm No Metered
25ppm Yes Metered
30ppm Yes Metered
35ppm Yes Metered
NOTE: Billing impression mode (BIM) On equates to A4 impression mode. Billing impression
mode (BIM) Off equates to A3 impression mode.
General Procedures and Information
GP 26, GP 27
BIM Initialization Kit
Number
(See NOTE) Product Code
Off 5MX 097S04888
Off 6MX 097S04889
Off 7MX 097S04890
On 2NA 097S04893
On 3NA 097S04894
On 4NA 097S04895
On 8NA 097S04899
On 9NA 097S04900
On 2NB 097S04901
On 3NB 097S04902
On 4NB 097S04903
On 5NB 097S04904
On 6NB 097S04905
On 8MX 097S04891
On 9MX 097S04892

GP 27 Billing Plan/Region Conversion Process

Purpose
To provide information about the process to follow when a customer requires a billing plan
change.
General Information
VersaLink® B7025/B7030/B7035 machines are shipped from manufacturing in a neutral state.
All billing plans are enabled with a configuration dongle, included in the initialization kit deliv-
ered with the machine. This dongle will set the billing plan (Sold/Metered/PagePack), machine
speed (25/30/35ppm) and billing impression mode.
The billing plan governs what consumables are compatible with the product:
• The metered billing plan allows metered consumables to be used on a machine that is
included as part of the metered contract.
• The sold billing plan only allows sold consumables (purchased by the customer), to be used.
NOTE: . Sold supplies can also be used in metered machines. However, metered sup-
plies cannot be used in sold machines (a fault code will be generated and a message dis-
played on the UI indicating toner incompatibility).
There are four billing pans supported:
• NA/XE Sold.
• DMO Sold.
• Worldwide Metered.
• PagePack (XE only).
Should a customer wish to convert their billing plan, this can be done from either the user inter-
face or Embedded Web Server and involves obtaining the following:
• For Sold to Metered or Metered to Sold; a plan conversion code.
• For Sold to XE PagePack or XE PagePack to Sold; a supplies plan activation code.
To confirm the customers current billing plan, either:
• Print a configuration report,
(Metered/PagePack) or Not Activated (Sold).
• Enter dC131. Check the NVM location values listed in
Table 1 Initialization kit numbers
Chain Link Parameter
700 400 Total Service Contract Mode 1 = Metered
700 774 PagePack Contract Setting
700 775 Supplies Plan Number
700 776 PagePack Contract Length
700 777 PagePack Region Code
April 2017
6-30 Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
GP 14. The supplies plan will be listed as either Activated
Table 1.
Value
2 = Sold
15 = Neutral (starter cartridge, region not yet set)
0 = Unlimited (Metered/Sold)
1 = Non-PagePack Contract (NA PagePack)
2 = Pack Contract (XE PagePack)
0 to 268435455
0 to 127 (Months) (1-126 = XE PagePack) (127
= NA PagePack)
0 = Worldwide/Neutral
1 = DMO/Sold
2 = NA/XE Sold
3 to 7 = Invalid
Launch Issue