Rep 60.9 Ffc Cable - Xerox VersaLink B7025 Service Manual

REP 60.9 FFC Cable

Parts List on PL 60.35
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
Figure 1 ESD Symbol
Observe ESD procedures during this procedure.
1. Remove the upper rear cover, REP
2. Remove the lower rear cover, REP
3. If the machine has an HDD assembly installed, remove the HDD assembly,
a. Disconnect the connectors (1).
b. Remove the HDD assembly (2).
Figure 2 HDD removal
Launch Issue
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
WARNING
GP 10. Disconnect the power cord
CAUTION
28.5.
28.6.
4. If the machine had an HDD assembly installed, remove both screws (1), then the HDD
bracket (2), Figure
5. Disconnect the FFC cable,
a. Carefully disconnect the FFC cable (1) by releasing the side clips.
b. Pull down the FFC cable (2).
Figure 2:
April 2017
4-157
3.
Figure 3 HDD bracket removal
Figure 4:
Figure 4 FFC cable
Repairs and Adjustments
REP 60.9