To 124-339 Ess Rom Dimm Rap - Xerox VersaLink B7025 Service Manual

Hide thumbs Also See for VersaLink B7025:
Table of Contents

Advertisement

124-331 to 124-339 ESS ROM DIMM RAP

124-331 The system detected that the ESS ROM DIMM #1 was not installed.
124-333 An error was detected in the Panther.
124-334 An error was detected in the standard built-in font ROM.
124-335 The installation of the font ROM was not detected.
124-337 An error was detected in the ESS built-in standard RAM.
124-338 The system detected that a duplicate font ROM was installed.
124-339 The system detected that the ROM DIMM for another model was installed.
Procedure
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to
GP
10. Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
Perform the steps that follow:
1.
Switch off, then switch on the machine,
2.
Ensure that all connectors on the drive PWB,
Item 6
are securely connected. Ensure all surface mounted modules on both PWBs are
securely connected.
3.
Reload the software,
GP
4.
4.
If the fault persists, install a new ESS PWB,
Launch Issue
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
WARNING
GP
10.
PL 1.10 Item 3
and the ESS PWB,
PL 3.10 Item
6.
124-340, 360, 390 CRUM Market Fail All RAP
124-340 The CRUM destinations stored in three positions match but their values are not set
(0).
124-360 The CRUM enable/disable settings stored in three positions match but their values
are not set (0).
124-390 The CRUM OEM destinations stored in three positions match but their values are not
set (0).
Procedure
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to
death or injury. Moving parts can cause injury.
Perform the steps that follow:
1.
Switch off, then switch on the machine,
2.
If the fault persists, install a new drive PWB,
PL 3.10
April 2017
2-563
WARNING
GP
10. Disconnect the power cord. Electricity can cause
GP
10.
PL 1.10 Item
3.
Status Indicator RAPs
124-331 to 124-339, 124-340, 360, 390

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Versalink b7030Versalink b7035

Table of Contents