Xerox VersaLink B7025 Service Manual page 698

10. Remove the paddle belt, Figure 8:
a. Remove two E-clips (1).
b. Move the two bearings (2) in the direction of the arrow.
c. Remove the sub paddle shaft assembly (3).
d. Remove the rear paddle belt (4).
Figure 8 Rear paddle belt removal
Repairs and Adjustments
REP 12.2
Replacement
1. The replacement is the reverse of the removal procedure.
2. Install the paddle link assembly (1) as shown in
Figure 9 Paddle link assembly installation
April 2017
4-58 Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
Figure 9.
Launch Issue