Xerox VersaLink B7025 Service Manual page 796

Replacement
1. The replacement is the reverse of the removal procedure.
2. When installing the print head assembly, fit the frame hole into the block (1),
Figure 6 Block
Repairs and Adjustments
REP 60.8
3. When installing the CRU upper guide assembly,
a. Align the boss (1) with the hole.
b. Align the slot (2) in the CRU upper guide assembly with the T- shaped alignment
Figure 6.
post of the conductor housing and push forward to ensure correct contact between
the AC spring coil and the metal contact of the CRU upper guide assembly.
April 2017
4-156
Figure 7.
Figure 7 Boss
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
Launch Issue