Wrong Fuser Type Rap - Xerox VersaLink B7025 Service Manual

028-910 Wrong Fuser Type RAP

028-910 The fuser needs to be replaced.
Procedure
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
Install a new fuser, PL 10.05 Item 2.
Launch Issue
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
WARNING
028-987 Tray Size Mismatch RAP
028-987 ATS/APS no destination, tray can not detect paper size.
Procedure
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to
death or injury. Moving parts can cause injury.
Perform the steps that follow:
1. Reload the relevant paper tray.
2. Set the specified paper on the specified tray.
3. If the fault persists, perform the steps that follow:
a. Switch off, then switch on the machine,
b. Ensure that all connectors on the drive PWB,
3.10 Item 6 are securely connected. Ensure all surface mounted modules on both
PWBs are securely connected.
c. Reload the software, GP
April 2017
2-403
WARNING
GP 10. Disconnect the power cord. Electricity can cause
GP 10.
PL 1.10 Item 3 and the ESS PWB,
4.
Status Indicator RAPs
028-910, 028-987
PL