Fuser Web Life End Rap - Xerox VersaLink B7025 Service Manual

010-414 Fuser Web Life End RAP

010-414 Fuser web life end.
Procedure
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
Perform the steps that follow:
1. Install a new fuser, PL 10.05 Item 2.
Status Indicator RAPs
010-414, 010-418, 420
WARNING
010-418, 420 Fuser Near Life Warning RAP
BSD-ON: BSD 10.2 Fusing Heat Control (2 of 2)
010-418 Fuser replacement time is approaching.
010-420 Fuser replacement time is approaching.
Procedure
No service action necessary. Advise the customer that the fuser is near of life.
April 2017
2-54 Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
Launch Issue