8.
Remove the drive assembly,
Figure
a.
Remove six screws (1).
b.
Release the latch (2), then remove the drive assembly (3).
Figure 4 Drive assembly removal
Repairs and Adjustments
REP 40.1
4:
Replacement
1.
The replacement is the reverse of the removal procedure.
2.
When installing the drive assembly, align the gear (1) with the flat on the shaft (2),
5.
April 2017
4-142
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
Figure 5 Gear alignment
Figure
Launch Issue