Xerox VersaLink B7025 Service Manual page 802

2. Disconnect the connector, Figure 2:
a. Release the harness from the clamp (1).
b. Disconnect the connector (2).
Figure 2 Harness release
3. Remove the bypass tray, Figure 3:
a. Remove two screws (1).
b. Remove the bypass tray (2).
Figure 3 Bypass tray removal
Repairs and Adjustments
REP 70.2
Replacement
1. The replacement is the reverse of the removal procedure.
2. When installing the bypass tray, insert the two bypass tray bosses into the holes in the
frame, Figure 4.
3. After installing bypass tray, open then close the L/H cover unit once.
April 2017
4-162 Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
Figure 4 Replacement
Launch Issue