Dc140 Analog Component Monitoring - Xerox VersaLink B7025 Service Manual

Table 1 HFSI Details
Chain-Link Name
955-828 Feed Clutch On-Count
955-830 Stamp Sol On Count
955-831 Stamp Action Count
956-802 Scan Count
956-803 Light Lamp Time
956-804 Lamp Turn On Count
General Procedures and Information
dC135, dC140

dC140 Analog Component Monitoring

Spec Life
Purpose
360K
To provide tools to start (actuate) and stop (de-actuate) monitoring of specific analog components.
100K The nominal range of the analog value and, when monitoring is active, the current value is displayed.
The values are updated at least every second to allow the component state to be monitored.
3K
6000K
Procedure
7200K
1. Enter Diagnostics,
6000K
2. Touch dC140 Analog Component Monitoring.
3. Touch Chain-Link.
4. Enter the relevant Chain-Link number, refer to
5. Touch OK.
6. Touch Start. The screen will display the information that follows:
•
•
•
•
7. To temporarily change the output level of a component:
a.
b.
c.
8. Touch Stop All to stop component operation.
9. Touch Close to return to the Diagnostics screen.
10. Exit diagnostics,
Chain-
Link
010-200 Heat Roll NC Sensor: Inf
010-201 Heat Roll NC Sensor: Temp The compensated value of the mid heat roll sensor.
010-202 Heat Roll NC Sensor: Diff
010-203 Heat Roll STS
071-200 Tray 1 Size Sensor Analog
072-200 Tray 2 Size Sensor Analog
073-200 Tray 3 Size Sensor Analog
074-200 Tray 4 Size Sensor Analog
092-206 ATC_SNR_K
April 2017
6-48
GP 1.
Chain-Link number of the component.
Input or output code clarification.
The enabled or disabled state.
The output level.
Touch Level (wrench symbol).
Touch the +/- buttons to enter the new value (1 to 65535).
Touch OK.
GP 1.
Table 1 Component list
Component Name Description
The detected value of the mid heat roll sensor.
Range: 1019 (low) to 150 (high)
Range: 1019 (low) to 130 (high)
The differential value of the mid heat roll sensor.
Range: -32 (low) to 1024 (high)
The STS temperature value of the rear heat roll sen-
sor.
Range: 1018 (low) to 120 (high)
Displays the value for tray 1 paper size.
Range: 0 to 989
Displays the value for tray 2 paper size.
Range: 0 to 247
Displays the value for tray 3 paper size.
Range: 0 to 247
Displays the value for tray 4 paper size.
Range: 0 to 247
TC detection in the developer housing assembly
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
Table 1.
Launch Issue