Rep 60.6 Light Guide - Xerox VersaLink B7025 Service Manual

8. Disconnect the FFC LED cable assembly from the guide,
Figure 5 Cable assembly disconnection (2)
9. Disconnect the FFC LED cable assembly from the ESS chassis assembly,
a. Move the connector housing catch (1) in the direction of the arrow.
b. Disconnect the FFC LED cable assembly (2).
Figure 6 Cable assembly disconnection (3)
Replacement
1. The replacement is the reverse of the removal procedure.
2. Perform ADJ 60.1 Full/Half Rate Carriage Position Adjustment.
Repairs and Adjustments
REP 60.5, REP 60.6

REP 60.6 Light Guide

Figure 5.
Parts List on
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
Do not touch the light guide with bare hands.
1.
2.
3.
4.
Figure 6:
April 2017
4-152
PL 60.20
WARNING
CAUTION
Remove the DADF, REP 5.1.
Remove the document glass, REP 60.1.
Move the full rate carriage to the cutouts in the frame.
Remove the LED bracket, Figure 1:
a. Remove three screws (1).
b. Remove the LED bracket (2).
Figure 1 LED bracket removal
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
GP 10. Disconnect the power cord
Launch Issue