Xerox VersaLink B7025 Service Manual page 716

6. Remove the front bracket, Figure 2:
a. Remove the screw (1).
b. Remove the bracket (2).
Figure 2 Front bracket removal
7. Remove the top tray, Figure 3:
a. Raise the integrated office finisher slightly in the direction of the arrow (1).
b. Remove the top tray (2).
Figure 3 Top tray removal
8. Remove the stacker sensor assembly,
a. Remove the screw (1).
b. Remove the stacker sensor assembly (2).
c. Disconnect the connectors, then release the harness from the clamps.
Repairs and Adjustments
REP 12.16
Figure 4:
Figure 4 Stacker sensor assembly removal
9. Remove the stacker assembly,
a. Remove five self-tapping screws (1).
b. Remove the screw (2).
c. Remove the stacker assembly (3).
Figure 5 Stacker assembly removal
April 2017
4-76 Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
Figure 5:
Launch Issue