5.
Remove the light guide,
Figure
2:
a.
Remove the screw (1).
b.
Remove the spring guide (2).
c.
Remove the screw (3).
d.
Remove the spring guide (4).
e.
Remove the light guide (5).
Figure 2 Light guide removal
Replacement
1.
The replacement is the reverse of the removal procedure.
2.
When installing the light guide, insert the boss into the locating hole in the full rate car-
riage.
Launch Issue
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
REP 60.7 IIT Scan Motor Assembly
Parts List on
PL 60.30
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1.
Remove the DADF,
REP
5.1.
2.
Remove the IIT rear cover,
3.
Remove the IIT top cover,
PL 60.05 Item
4.
Remove the IIT scan motor assembly,
a.
Release the cable clamp (1).
b.
Disconnect the connector (2).
c.
Remove the extension spring (3).
d.
Remove three screws (4).
e.
Remove the IIT scan motor assembly (5).
Figure 1 IIT scan motor assembly removal
April 2017
4-153
WARNING
GP
10. Disconnect the power cord
PL 60.05 Item
4.
3.
Figure
1:
Repairs and Adjustments
REP 60.6, REP 60.7