Xerox VersaLink B7025 Service Manual page 856

7. Remove two front screws (1), Figure
Figure 2 Front screw removal
Take care not to damage the tray 2 feed out sensor actuator (4) when releasing or removing
the takeaway roll.
8. Move the takeaway chute assembly (1) to the right, then release the front of the takeaway
roll (2) from the chute, Figure 3.
Repairs and Adjustments
REP 80.41
2.
CAUTION
NOTE: Do not lose the front plastic bearing (3).
Figure 3 Front bearing release
9. Remove the takeaway roll (1),
Figure 4 Takeaway roll removal
Replacement
The replacement is the reverse of the removal procedure.
April 2017
4-216 Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
Figure 4.
Launch Issue