REP 13.27 Front/Rear Tamper Home Sensors
Parts List on
PL 13.28
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1.
Remove the compiler tray assembly,
2.
Place the compiler tray upside down on a work surface.
3.
Remove the front or rear tamper home sensor,
a.
Disconnect the connector (1).
b.
Remove the front or rear tamper home sensor (2).
NOTE: The removal of the rear tamper home sensor is shown in
Figure 1 Tamper home sensor removal
Replacement
The replacement is the reverse of the removal procedure.
Repairs and Adjustments
REP 13.27, REP 13.28
WARNING
GP
10. Disconnect the power cord
REP
13.17.
Figure
1:
Figure
REP 13.28 Compiler Tray No Paper Sensor
Parts List on
PL 13.28
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1.
Remove the compiler tray assembly,
2.
Place the compiler tray upside down on a work surface.
3.
Remove the screw (1) that secures the bracket,
1.
April 2017
4-122
WARNING
GP
10. Disconnect the power cord
REP
13.17.
Figure
1.
Figure 1 Bracket removal
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
Launch Issue