6.
Attach the extension spring hanger end of the carriage cable,
a.
Remove the tape (1) that secures the cable.
b.
Wrap the cable on the pulley (2).
c.
Wrap the cable on the pulley at the rear of the half rate carriage (3).
d.
Attach the extension spring on the cable and hook it to the Frame (4).
Figure 11 Spring attachment
Repairs and Adjustments
REP 60.3
Figure
11:
7.
Loosely attach the cable to the full rate carriage,
a.
b.
c.
8.
Perform
9.
Reinstall all removed components.
April 2017
4-148
Remove the tape (1).
Move the full rate carriage (2) to the cutout (4) in the frame.
Loosely attach the cable to the full rate carriage (3).
Figure 12 Full rate carriage attachment
ADJ 60.1
Full/Half Rate Carriage Position Adjustment.
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
Figure
12:
Launch Issue