Iqs 1 Solid Area Density And Tone Reproduction - Xerox VersaLink B7025 Service Manual

IQS 1 Solid Area Density and Tone Reproduction

Documents
Test patterns: 82E2000 (A3 and 11x17) 82E2010 (A4) 82E2020 (8.5x11) and the solid area
density scale, 82E8230 (SIR 542.00) for reference.
Specification
Copy
Compare the copies of one of the above 82E series test patterns,
ument glass, with the solid area density scale, 82E8230 (SIR 542.00):
• The density of the 2.1; 2.3; and 2.5 areas must be as dark or darker than the 1.3 refer-
ence, but less than 1.5.
• The 3.0, 3.3 and 3.4 text areas should all be visible.
• The 4.1 line pair should be visible.
• The 2.0, 2.2 and 2.4 squares should be darker than the original document.
• The bullseye targets should be clearly reproduced.
Print
Compare a print of the internal test pattern 53 with the solid area density scale, 82E8230 (SIR
542.00). The density of the solid areas must be as dark or darker than the 1.3 reference, but
less than 1.5.
Corrective action
If the solid area density specification is not met, perform the
Launch Issue
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
Figure 1, made from the doc-
IQ2 IOT IQ Defects RAP.
April 2017
3-23
82E2000
Figure 1 Test patterns
SIR 542.00
Imaqe Quality
IQS 1