116-386 Fax USB Port RAP
116-386 At startup, the fax USB cable was connected to an incorrect port.
Procedure
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to
GP
10. Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
Perform the steps that follow:
1.
Switch off, then switch on the machine,
2.
Ensure that the fax USB cable is connected to the correct USB port.
Launch Issue
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
WARNING
GP
10.
116-388 No HDD RAP
116-388 The system detected that the HDD was not installed, even though the system configu-
ration (with Fax and Finisher) requires a HDD.
Procedure
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to
death or injury. Moving parts can cause injury.
Perform the steps that follow:
1.
Switch off, then switch on the machine,
2.
If the fault persists, perform the
April 2017
2-515
WARNING
GP
10. Disconnect the power cord. Electricity can cause
GP
10.
016-210, 506, 777, 780, 798
HDD Error RAP.
Status Indicator RAPs
116-386, 116-388