Lph Configuration Rap - Xerox VersaLink B7025 Service Manual

061-361 LPH Configuration RAP

BSD-ON: BSD 6.4 Laser Control
061-361 The model number of the installed LPH does not match. It may also be a memory
error in the LPH.
Procedure
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
1. Switch off, then switch on the machine,
2. Check that a valid LPH is installed.
3. If the fault persists, install new components as necessary:
• Print head assembly, PL 60.35 Item
• ESS PWB, PL 3.10 Item 6.
Status Indicator RAPs
061-361, 062-277
WARNING
GP 10.
1.
062-277 DADF Communication Fail RAP
BSD-ON: BSD 3.5 PWB Communications (ESS PWB to DADF)
062-277 Communications cannot be established between the ESS PWB and the DADF PWB.
Procedure
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to
death or injury. Moving parts can cause injury.
1. Switch off, then switch on the machine,
2. Check the connections and wiring between the ESS PWB ( P/J750) and the DADF PWB (
P/J751) for an open circuit, short circuit or poor contact.
3. If the fault persists, install new components as necessary:
• DADF PWB, PL 5.10 Item
• ESS PWB, PL 3.10 Item
April 2017
2-462 Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
WARNING
GP 10. Disconnect the power cord. Electricity can cause
GP 10.
11.
6.
Launch Issue