3.
Prepare to remove the tray front cables. Remove two E-rings, wire guides and pulleys (1)
from the front of the HCF tray,
Figure
Figure 2 Preparation
Repairs and Adjustments
REP 70.6
2.
4.
When both cables are slack, disengage the lift shaft from the frame, Then slide the tray
cable pulley to the front of the lift shaft to release the rear lift cable ends that are trapped
in the pocket underneath the tray cable pulley,
Figure 3 Releasing the cable ends
April 2017
4-168
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
Figure
3.
Launch Issue