Rep 13.14 Sub Paddle Solenoid Assembly; Rep 13.15 Stapler Move Motor - Xerox VersaLink B7025 Service Manual

REP 13.14 Sub Paddle Solenoid Assembly

Parts List on PL 13.26
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1. Remove the eject cover, REP 13.9.
2. Remove the sub paddle solenoid assembly,
a. Disconnect the connector (1).
b. Release the harness from the clamps (2).
c. Remove the screw (3), then the sub paddle solenoid assembly.
Figure 1 Sub paddle solenoid assembly removal
Replacement
The replacement is the reverse of the removal procedure.
Repairs and Adjustments
REP 13.14, REP 13.15
WARNING
GP 10. Disconnect the power cord
Figure 1:

REP 13.15 Stapler Move Motor

Parts List on PL 13.20
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1. Remove the finisher stapler assembly,
2. Remove two screws (1), Figure
April 2017
4-104 Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
WARNING
GP 10. Disconnect the power cord
REP 13.16.
1.
Figure 1 Screw removal
Launch Issue