Iq24 Toner Streak Rap; Iq25 Light Induced Fatigue Rap - Xerox VersaLink B7025 Service Manual

IQ24 Toner Streak RAP

A long thin line in the process direction. The length can range from 2mm (0.08 inch) to over
10cm (4 inches). This occurs in solids or halftones, it does not occur in the background. Refer
to Figure 1.
Ensure IQ1 Image Quality Entry RAP is performed before starting this RAP.
Figure 1 Example
Cause
A lump of supply toner gets transported on to the magnet roller, then gets developed.
Action
Feed several blank pages, followed by several high density prints.
Launch Issue
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer

IQ25 Light Induced Fatigue RAP

Drum pitch, 94.2mm (3.7 inches) shade occurs in halftones. Refer to
Ensure IQ1 Image Quality Entry RAP is performed before starting this RAP.
Cause
Light fatigue of the photoreceptor.
Action
1. Leave overnight.
2. If necessary, install a new drum cartridge,
April 2017
3-21
Figure 1.
Light fatigue
(density increase)
Photoreceptor cycle
length, 94mm (3.7
inches)
Figure 1 Example
PL 90.20 Item 1.
Imaqe Quality
IQ24, IQ25