Rep 13.17 Compiler Tray Assembly - Xerox VersaLink B7025 Service Manual

REP 13.17 Compiler Tray Assembly

Parts List on PL 13.28
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1. Undock the finisher, REP 13.5.
2. Remove the front cover, REP 13.6.
3. Remove the rear upper cover, REP
4. Remove the foot cover, REP 13.10.
5. Remove the stacker lower cover, REP
6. Remove the stacker tray, REP 13.20.
7. Remove the stacker upper cover, REP
8. Remove the eject cover, REP 13.9.
9. Remove the E-ring and brass bearing from the front of the shaft (1),
Figure 1 E-ring and bearing removal
Launch Issue
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
WARNING
GP 10. Disconnect the power cord
13.7.
13.11.
13.12.
Figure
10. Remove the eject roll shaft,
a. Remove the E-ring (1).
b. Slide the eject roller shaft (2) toward the front.
c. Remove the gear and brass bushing (3).
d. Remove the eject roll shaft (4) from the finisher.
1.
April 2017
4-107
Figure 2:
Figure 2 Eject roll shaft removal
Repairs and Adjustments
REP 13.17