Xerox VersaLink B7025 Service Manual page 710

Figure 2 Gear removal
5. Remove the gear pulley, Figure 3:
a. Remove the E-clip (1).
b. Remove the gear (2).
c. Remove the belt (3) from the pulley.
d. Remove the flange (4).
Figure 3 Gear pulley removal
Repairs and Adjustments
REP 12.11
6. Remove the bearing, Figure
7. Remove the entrance lower chute assembly,
a. Remove two screws (1).
b. Loosen two screws (2).
c. Remove the entrance lower chute assembly (3).
Figure 5 Entrance lower chute assembly removal
Replacement
The replacement is the reverse of the removal procedure.
April 2017
4-70 Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
4.
Figure 4 Bearing removal
Figure 5:
Launch Issue