Rep 80.3 Tray 2 Feeder Assembly (1Tm) - Xerox VersaLink B7025 Service Manual

REP 80.3 Tray 2 Feeder Assembly (1TM)

Parts List on PL 80.15
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1. Pull out tray 2. Remove the paper.
2. Remove tray 2.
3. Open the left cover assembly, PL 70.15 Item
4. Remove the ESD cover, Figure 1:
a. Disengage the hook (1).
b. Remove the ESD cover (2).
Figure 1 ESD cover removal
Launch Issue
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
WARNING
GP 10. Disconnect the power cord
12.
5. Remove the tray 2 feeder assembly,
a. Disconnect the connectors (1).
b. Remove two screws (2).
c. Remove the tray 2 feeder assembly (3).
Figure 2 Tray 2 feeder assembly removal
Replacement
1. The replacement is the reverse of the removal procedure.
2. If a new tray 2 feeder assembly is installed, enter
counter 954-801.
April 2017
4-179
Figure 2:
dC135 HFSI Counter. Reset the HFSI
Repairs and Adjustments
REP 80.3