Email To Invalid Box Rap - Xerox VersaLink B7025 Service Manual

016-703 Email To Invalid Box RAP

016-703 When receiving Email, fax or internet fax, an invalid (not setup) mailbox number is
selected.
Procedure
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
Perform the steps that follow:
1. Advise the customer to:
a. Check whether the selected mailbox is set up correctly.
b. Have Email, fax or internet fax sent to a valid mailbox.
2. Ensure all fax PWBs are correctly installed,
3. Reload the software, GP 4.
4. Check the wiring between the ESS PWB,
5. Initialise the hard disk. Refer to dC355
6. Initialize the Sys - System NVM, refer to dC301.
7. Install a new hard disk, PL 3.10 Item
Launch Issue
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
WARNING
PL 20.05.
PL 3.10 Item 6 and the hard disk.
Hard Disk Diagnostics.
2.
016-704 Mailbox Full RAP
016-704 The system detected that a mailbox was full (it exceeded the maximum number of
documents per box) and aborted a job.
Procedure
Perform the steps that follow:
1. Advise the customer to delete unnecessary documents, then repeat the operation.
2. If the fault persists, reload the software,
April 2017
2-175
GP 4.
Status Indicator RAPs
016-703, 016-704