Xerox VersaLink B7025 Service Manual page 685

Do not lose the gear on the rear of the front bracket. Refer to
12. Remove the front bracket and ground roll plate,
a. Remove two screws (1).
b. Loosen the screw (2).
c. Remove the front bracket and ground roll plate (3).
Figure 5 Front bracket removal
Launch Issue
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
CAUTION
Figure 6.
Figure 5:
Figure 6 Gear
13. Remove the knob, Figure 7:
a. Remove the gear (1).
b. Remove handle knob (2).
April 2017
4-45
Figure 7 Knob
Repairs and Adjustments
REP 5.17