Rep 2.1 User Interface Assembly - Xerox VersaLink B7025 Service Manual

REP 2.1 User Interface Assembly

Parts List on PL 2.05
Removal
NOTE: A video of this procedure is available on the EDOC. The video is accessible from the
Library menu on the Service Interface.
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1. If possible, record the current software level by either:
• Printing the configuration report,
• From the user interface Home screen, touch Device, then About. Scroll down to view
the Software Version.
2. Open the DADF.
3. Remove the ICCR cover, PL 2.05 Item
NOTE: The ICCR cover is secured by 2 clips at the front.
Launch Issue
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
WARNING
GP 10. Disconnect the power cord
GP 14.
12.
4. Remove the upper cover, Figure
a. Remove 3 screws (1).
b. Remove the upper cover (2).
5. Fully raise the UI assembly, then remove the cable cover,
6. Remove the inner cover, PL 2.05 Item
April 2017
4-11
1:
Figure 1 Upper cover
PL 2.05 Item
10.
Repairs and Adjustments
8.
REP 2.1