To 024-621 Serial/Product Number Restore Rap - Xerox VersaLink B7025 Service Manual

024-616 to 024-621 Serial/Product Number Restore RAP

024-616 Serial number master was restored automatically.
024-617 Serial number backup 1 was restored automatically.
024-618 Serial number backup 2 was restored automatically.
024-619 Product number master was restored automatically.
024-620 Product number backup 1 was restored automatically.
024-621 Product number backup 2 was restored automatically.
Procedure
For information only, no service action necessary.
Launch Issue
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
024-700 Memory Shortage or No Hard Disk RAP
BSD-ON: BSD 3.9 ESS
024-700 A job that could not be printed due to insufficient system memory or hard disk not
installed was received.
Procedure
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to
death or injury. Moving parts can cause injury.
Perform the steps that follow:
1. Remove, then re-install the SD memory card,
memory card.
2. Ensure that the connectors from the hard disk drive,
3.10 Item 6 are securely connected.
3. If the fault persists, install a new hard disk drive,
April 2017
2-311
WARNING
GP 10. Disconnect the power cord. Electricity can cause
PL 3.10 Item 11. If necessary, install a new
PL 3.10 Item 2
PL 3.10 Item 2.
Status Indicator RAPs
024-616 to 024-621, 024-700
to the ESS PWB, PL