Rep 80.31 Tray 4 Upper Feed Chute (Ttm); Rep 80.32 Tray 4 Transport Assembly Nip Rolls (Ttm) - Xerox VersaLink B7025 Service Manual

REP 80.31 Tray 4 Upper Feed Chute (TTM)

Parts List on PL 80.70
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1. Remove the tray 4 feeder assembly,
2. Remove the upper feed chute, Figure
a. Remove two screws (1).
b. Remove the lower feed chute (2).
Figure 1 Upper feed chute removal
Replacement
The replacement is the reverse of the removal procedure.
Repairs and Adjustments
REP 80.31, REP 80.32
WARNING
GP 10. Disconnect the power cord
REP 80.35.
1:

REP 80.32 Tray 4 Transport Assembly Nip Rolls (TTM)

Parts List on PL 80.70
Removal
Switch off the electricity to the machine. Refer to
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
Ensure that the tray 4 transport assembly,
tray 4 assembly.
1. Fully pull out tray 4. Lift out the tray 4 assembly,
2. Remove the tray 4 transport assembly from the tray 4 assembly,
a. Remove two screws (1).
b. Remove the tray 4 transport assembly (2).
Figure 1 Transport assembly removal
April 2017
4-206 Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
WARNING
GP 10. Disconnect the power cord
CAUTION
PL 80.70 Item 11 is supported when removing the
PL 70.65 Item 1.
Figure 1:
Launch Issue