Dadf Pre Registration Sensor Static Jam Rap - Xerox VersaLink B7025 Service Manual

005-907 DADF Pre Registration Sensor Static Jam RAP

BSD-ON: BSD 5.4 Document Feeding (1 of 2)
005-907 DADF pre registration sensor detected paper when powering on, closing the feeder
cover or closing the DADF.
Procedure
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
Refer to the procedure that follows as necessary:
• GP 7 How to Check a Sensor.
Perform the steps that follow:
1. Enter dC330, code 005-206. Check the DADF pre registration sensor,
2. If the fault persists, install a new DADF PWB,
Launch Issue
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
WARNING
PL 5.70 Item
PL 5.10 Item 11
005-908 DADF Registration Sensor Static Jam RAP
BSD-ON: BSD 5.6 Document Scan, Invert and Exit Transportation
005-908 DADF registration sensor detected paper when powering on, closing the feeder cover
or closing the DADF.
Procedure
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to
death or injury. Moving parts can cause injury.
Refer to the procedure that follows as necessary:
• GP 7 How to Check a Sensor.
Perform the steps that follow:
3. 1. Enter dC330, code 005-110. Check the DADF registration sensor,
2. If the fault persists, install a new DADF PWB,
April 2017
2-45
WARNING
GP 10. Disconnect the power cord. Electricity can cause
PL 5.70 Item
PL 5.10 Item 11.
Status Indicator RAPs
005-907, 005-908
3.