Cluster-Snmp-Agent Mib-View - H3C S5120-SI Series Command Reference Manual

Note that:
The command can be executed once on the management device only. This configuration will be
synchronized to the member devices in the whitelist, which is equal to configuring multiple member
devices at one time.
SNMPv3 group name will be retained if a cluster is dismissed or a member device is deleted from
the whitelist.
If the same group name as the current one has been configured on a member device, the current
group name will replace the original one.
Examples
# Create an SNMP group snmpgroup.
<aaa_0.Sysname> system-view
[aaa_0.Sysname] cluster
[aaa_0.Sysname-cluster] cluster-snmp-agent group v3 snmpgroup

cluster-snmp-agent mib-view

Syntax
cluster-snmp-agent mib-view included view-name oid-tree
undo cluster-snmp-agent mib-view view-name
View
Cluster view
Default Level
1: Monitor level
Parameters
included: Includes MIB view.
view-name: MIB view name, which is a string of 1 to 32 characters.
oid-tree: MIB subtree. It is a string of 1 to 255 characters, which can only be a variable OID string or
variable name string. OID is composed of a series of integers, indicating where a node is in the MIB tree.
It can uniquely identify an object in a MIB.
Description
Use the cluster-snmp-agent mib-view command to create or update the MIB view information shared
by a cluster.
Use the undo cluster-snmp-agent mib-view command to delete the MIB view information shared by a
cluster.
By default, the MIB view name shared by a cluster is ViewDefault, in which the cluster can access ISO
subtree.
Note that:
This command can be executed once on the management device only. This configuration will be
synchronized to member devices on the whitelist, which is equal to configuring multiple member
devices at one time.
1-26