Display Time-Range - H3C S5120-SI Series Command Reference Manual

----------------------------------------------------
ACL 1024
Meter 256
----------------------------------------------------
GE1/0/25..GE1/0/48
GE1/0/51 GE1/0/52
----------------------------------------------------
Type Total
----------------------------------------------------
ACL 1024
Meter 256
Table 1-2 display acl resource command output description
Type
Total
Reserved
Configured
Remaining

display time-range

Syntax
display time-range { time-range-name | all }
View
Any view
Default Level
1: Monitor level
Parameters
time-range-name: Time range name, a case insensitive string of 1 to 32 characters. It must start with an
English letter.
all: Displays the configuration and status of all existing time ranges.
Description
Use the display time-range command to display the configuration and status of a specified time range
or all time ranges.
A time range is active if the system time falls into its range.
Examples
# Display the configuration and status of time range trname.
370 0
0 0
Reserved Configured
374 0
0 0
Field
654
256
Remaining
650
256
Description
Resource type. Possible values are as follows:
METER for traffic policing resources,
ACL for rule resources,
Total number of ACL rules supported
Number of reserved ACL rules
Number of configured ACL rules
Number of remaining ACL rules
1-6