H3C S5120-SI Series Command Reference Manual page 627

Examples
# View the NTP service status information.
<Sysname> display ntp-service status
Clock status: unsynchronized
Clock stratum: 16
Reference clock ID: none
Nominal frequency: 100.0000 Hz
Actual frequency: 100.0000 Hz
Clock precision: 2^18
Clock offset: 0.0000 ms
Root delay: 0.00 ms
Root dispersion: 0.00 ms
Peer dispersion: 0.00 ms
Reference time: 00:00:00.000 UTC Jan 1 1900(00000000.00000000)
Table 1-3 display ntp-service status command output description
Clock status
Clock stratum
Reference clock ID
Nominal frequency
Actual frequency
Clock precision
Clock offset
Root delay
Root dispersion
Peer dispersion
Reference time
Field Description
Status of the system clock, including
Synchronized: The
synchronized.
Unsynchronized: The system clock has not been
synchronized.
Stratum level of the system clock
After the system clock is synchronized to a remote time
server, this field indicates the address of the remote time
server; after the system clock is synchronized to a local
reference source, this field indicates the address of the
local clock source:
When the local clock has a stratum level of 1, the value
of this field is "LOCL";
When the stratum of the local clock has another value,
the value of this filed is the IP address of the local clock.
The nominal frequency of the local system hardware clock,
in Hz
The actual frequency of the local system hardware clock,
in Hz
The precision of the system clock
The offset of the system clock relative to the reference
source, in milliseconds
The roundtrip delay from the local device to the primary
reference source, in milliseconds
The maximum error of the system clock relative to the
primary reference source, in milliseconds
The maximum error of the system clock relative to the
reference source, in milliseconds
Reference timestamp
1-6
system clock has been