Cluster-Local-User - H3C S5120-SI Series Command Reference Manual

Description
Use the cluster switch-to command to switch between the management device and member devices.
Examples
# Switch from the operation interface of the management device to that of the member device
numbered 6 and then switch back to the operation interface of the management device.
<aaa_0.Sysname> cluster switch-to 6
<aaa_6.Sysname> quit
<aaa_0.Sysname>

cluster-local-user

Syntax
cluster-local-user user-name password { cipher | simple } password
undo cluster-local-user user-name
View
Cluster view
Default Level
1: Monitor level
Parameters
cipher: Indicates that the password is in cipher text.
simple: Indicates that the password is in plain text.
user-name: Username used for logging onto the devices within a cluster through Web, which is a string
of 1 to 55 characters.
password: Password used for logging onto the devices within a cluster through Web. This password is a
string of 1 to 63 characters when the simple keyword is specified, and can be in either plain text or
cipher text when the cipher keyword is specified. A plain text password must be a string of 1 to 63
characters. The cipher text password must have a fixed length of 24 or 88 characters. The password is
case sensitive.
Description
Use the cluster-local-user command to configure Web user accounts in batches.
Use the undo cluster-local-user command to remove the configuration.
Note that the command can be configured once on the management device only.
Examples
# On the management device, configure Web user accounts for the devices within a cluster, with
username being abc, password being 123456 and displayed in plain text.
<aaa_0.Sysname> system-view
[aaa_0.Sysname] cluster
[aaa_0.Sysname-cluster] cluster-local-user abc password simple 123456
1-22