H3C S5120-SI Series Command Reference Manual page 333

Use the display ip routing-table verbose command to display detailed information about all routes in
the routing table.
This command displays detailed information about all active and inactive routes, including the statistics
of the entire routing table and information for each route.
Examples
# Display brief information about active routes in the routing table.
<Sysname> display ip routing-table
Routing Tables: Public
Destinations : 5
Destination/Mask
0.0.0.0/32
127.0.0.0/8
127.0.0.1/32
192.168.0.0/24
192.168.0.53/32
Table 1-1 display ip routing-table command output description
Field
Destinations
Routes
Destination/Mask
Proto
Pre
Cost
Nexthop
Interface
# Display detailed information about all routes in the routing table.
<Sysname> display ip routing-table verbose
Routing Table : Public
Destinations : 5
Destination: 0.0.0.0/32
Protocol: Static
Preference: 60
NextHop: 1.1.1.1
BkNextHop: 0.0.0.0
RelyNextHop: 0.0.0.0
Tunnel ID: 0x0
State: Active Adv
Tag: 0
Destination: 127.0.0.0/8
Protocol: Direct
Routes : 5
Proto Pre Cost
Static 60 0
Direct 0 0
Direct 0 0
Direct 0 0
Direct 0 0
Number of destination addresses
Number of routes
Destination address/mask length
Protocol that presents the route
Priority of the route
Cost of the route
Address of the next hop on the route
Outbound interface for packets to be forwarded along the route
Routes : 5
Process ID: 0
Cost: 0
Interface: Vlan-interface1
BkInterface:
Neighbor : 0.0.0.0
Label: NULL
Age: 00h00m14s
Process ID: 0
NextHop
1.1.1.1
127.0.0.1
127.0.0.1
192.168.0.53
127.0.0.1
Description
1-2
Interface
Vlan1
InLoop0
InLoop0
Vlan1
InLoop0