Display Lldp Tlv-Config - H3C S5120-SI Series Command Reference Manual

Field
Admin status
Trap Flag
Polling interval
Number of neighbors
Number of MED neighbors
Number of CDP neighbors
Number of sent optional TLV
Number of received unknown TLV

display lldp tlv-config

Syntax
display lldp tlv-config [ interface interface-type interface-number ]
View
Any view
Default level
1: Monitor level
Parameters
interface interface-type interface-number: Specifies a port by its type and number.
Description
Use the display lldp tlv-config command to display the types of advertisable optional LLDP TLVs of a
port.
If no port is specified, this command displays the types of advertisable optional TLVs of each port.
Examples
# Display the types of advertisable optional LLDP TLVs of each port.
<Sysname> display lldp tlv-config
LLDP tlv-config of port 1[GigabitEthernet1/0/1]:
NAME
Basic optional TLV:
Port Description TLV
System Name TLV
System Description TLV
System Capabilities TLV
LLDP mode of the port, which can be:
TxRx. A port in this mode sends and receives LLDPDUs.
Rx_Only. A port in this mode receives LLDPDUs only.
Tx_Only. A port in this mode sends LLDPDUs only.
Disable. A port in this mode does not send or receive
LLDPDUs.
Indicates whether trap is enabled.
LLDP polling interval. A value of 0 indicates LLDP polling is disabled.
Number of the LLDP neighbors connecting to the port
Number of MED neighbors connecting to the port
Number of the CDP neighbors connecting to the port
Number of the optional TLVs contained in an LLDPDU sent through the
port
Number of the unknown TLVs contained in a received LLDPDU
STATUS DEFAULT
YES YES
YES YES
YES YES
YES YES
1-12
Description