H3C S5120-SI Series Command Reference Manual page 772

Hide thumbs Also See for S5120-SI Series:

Table of Contents

If you do not use the module-name argument to set output rules for a module, the module uses the

default output rules or the output rules set by the default keyword; otherwise the module uses the

output rules separately set for it.

If you use the default keyword to set the output rules for all the modules without specifying the

debug, log, and trap keywords, the default output rules for the modules are used. Refer to

for details.

If you use the module-name argument to set the output rules for a module without specifying the

debug, log, and trap keywords, the default output rules for the module are as follows: the output of

log and trap information is enabled, with severity being informational; the output of debugging

information is disabled, with severity being debug. For example, if you execute the command

info-center source snmp channel 5, the command is actually equal to the command info-center

source snmp channel 5 debug level debugging state off log level informational state on trap

level informational state on.

If you repeatedly use the command to set the output rules for a module or for all the modules with

the default keyword, the last configured output rules take effect

After you separately set the output rules for a module, you must use the module-name argument to

modify or remove the rules. The new configuration by using the default keyword is invalid on the

You can configure to output the log, trap and debugging information to the trap buffer, but the trap

buffer only receives the trap information and discards the log and debugging information.

You can configure to output the log, trap and debugging information to the log buffer, but the log

buffer only receives the log and debugging information and discards the trap information.

You can configure to output the log, trap and debugging information to the SNMP module, but the

SNMP module only receives the trap information and discards the log and debugging information.

Table 1-9 Default output rules for different output destinations

Chapters

Table of Contents