H3C S5120-SI Series Command Reference Manual page 829

A new device in the topology information is identified based on the standard topology. After you add a
device into a cluster, if you do not use the topology accept command to confirm the current topology
and save it as the standard topology, this device is still regarded as a new device.
display cluster members
Syntax
display cluster members [ member-number | verbose ]
View
Any view
Default Level
1: Monitor level
Parameters
member-number: Number of the member device, in the range 0 to 255.
verbose: Displays the detailed information about all the devices in a cluster.
Description
Use the display cluster members command to display the information about cluster members.
Note that this command can be executed on the management device only.
Examples
# Display the information about all the devices in a cluster.
<aaa_0.Sysname> display cluster members
SN Device
0 S3100
2 S3100
3 Sysname S3528P
4 S3100
5 S3100
Table 1-10 display cluster members command output description
SN
Device
MAC Address
MAC Address
00e0-fc00-1751
00e0-fc00-3199
00e0-fd00-0043
00e0-fc00-2579
000f-e20f-c415
Field
1-36
Status Name
Admin aaa_0.Sysname
Up aaa_2.S5120_4
Up aaa_3.S5120
Up aaa_4.S5120_2
Up aaa_5.S5120_5
Description
Member number
Device model
MAC address of a device