Display Vlan - H3C S5120-SI Series Command Reference Manual

The Maximum Transmit Unit is 1500
Internet protocol processing : disabled
IP Packet Frame Type: PKTFMT_ETHNT_2,
Last clearing of counters:
Last 300 seconds input:
Last 300 seconds output:
0 packets input, 0 bytes, 0 drops
0 packets output, 0 bytes, 0 drops
Table 1-1 display interface vlan-interface command output description
Field
Vlan-interface2 current state
Line protocol current state
Description
The Maximum Transmit Unit
Internet protocol processing :
IP Packet Frame Type
Hardware address
Last 300 seconds input: 0
bytes/sec 0 packets/sec
Last 300 seconds output: 0
bytes/sec 0 packets/sec
0 packets input, 0 bytes, 0 drops
0 packets output, 0 bytes, 0 drops

display vlan

Syntax
display vlan [ vlan-id1 [ to vlan-id2 ] | all | dynamic | reserved | static ]
Hardware Address: 000f-e249-8050
Never
0 bytes/sec 0 packets/sec
0 bytes/sec 0 packets/sec
The physical state of the VLAN interface, which can be one of
the following:
DOWN ( Administratively ): The administrative state of the
VLAN interface is down because it has been manually shut
down with the shutdown command.
DOWN: The administrative state of this VLAN interface is
up, but its physical state is down. It indicates that the VLAN
corresponding to this interface does not contain any port in
the UP state (possibly because the ports are not physical
connected or the lines have failed).
UP: both the administrative state and the physical state of
this VLAN interface are up.
The link layer protocol state of a VLAN interface, which can be
one of the following:
DOWN: The protocol state of this VLAN interface is down,
usually because no IP address is configured.
UP: The protocol state of this VLAN interface is up.
The description string of a VLAN interface
The MTU of a VLAN interface
IP packets processing ability. Disabled indicates that the
interface is not configured with an IP address.
IPv4 outgoing frame format
MAC address corresponding to a VLAN interface
Average rate of input packets and output packets in the last 300
seconds (in bps and pps)
Total number and size (in bytes) of the received packets of the
interface and the number of the dropped packets
Total number and size (in bytes) of the transmitted packets of
the interface and the number of the dropped packets
1-3
Description