Display Cluster Black-List - H3C S5120-SI Series Command Reference Manual

|
├-(P_1/10)<-->(P_4/1)[Sysname:00e0-fc05-4300]
|
└-(P_1/8)<-->(P_1/12)[aaa_1.Sysname:00e0-fc00-7016]
Table 1-6 display cluster base-topology command output description
PeerPort
ConnectFlag
NativePort
SysName
DeviceMac

display cluster black-list

Syntax
display cluster black-list
View
Any view
Default Level
2: System level
Parameters
None
Description
Use the display cluster black-list command to display the current blacklist of a cluster.
Note that this command can be executed on the management device only.
Examples
# View the current blacklist of the cluster.
<aaa_0.Sysname> display cluster black-list
Device ID
00e0-fc00-0010
Table 1-7 display cluster black-list command output description
Device ID
Access Device ID
Access port
Field
Access Device ID
00e0-fc00-3550
Field
Peer port
Connection flag: <-->
Local port
System name of the peer device
MAC address of the peer device
Access port
GigabitEthernet1/0/1
Description
ID of the blacklist device, indicated by its MAC address.
ID of the device connected to the blacklist device,
indicated by its MAC address.
Port connected to the blacklist device.
1-32
Description